MICROSCOPE TOOL KIT

- This is a portable product with video microscope used to inspect all kinds of fiber optic terminations, especially for the female ones. It eliminates the need to access the backside of patch panels or disasemble hardware devices prior to inspection.

Items included in the kit with corresponding part number:

1. Microscope: 1EQISTQPB

2. Microscope SC-M: 1EQISTQTSCMA

3. Microscope SC-F: 1EQISTQTSCFE

4. Microscope LC-M: 1EQISTQTLCMA

5. Microscope LC-F: 1EQISTQTLCFE

6. Microscope Mil-M: FS-T00090

7. Microscope Mil-F: FS-T00078

8. LC Cleaner/1.25mm: 1TL01PE-12-001

9. SC Cleaner/2.5mm: 1TL01PE-25-002

10. MIL Cleaner/1.6mm: 1TL01PE-MP-0001

- It is essential to use for cleaning connectors, before using the fusion splicer and using it can maximize the network performance of the products.

- It is very easy to use and cheaper to clean your items and use it for checking any insertion loss and signal issues.

- You can buy it in set and it is easy to carry and use it anywhere you would like to do.

HOW TO USE THE SCOPE SET

1. you can use the monitor for checking if there is a dirty in the cable and ferrule core.

2. using the scope tip you can also remove the dirt and clean the parts using a fan cleaner using the 2 step flush or 2 step pump (cross)

3. then use the scope monitor to check if the core is clean after using the fan cleaner.

4. you can now use the connectors, cables, ferrule.

5. you can easily keep and store the items inside the box.

3 types of FAN CLEANER:

1. For 1.25mm type, you can use LC and MU type connector.

2. For 2.5mm type, you can use SC, FC and ST type connector.

3. 1.6mm type MIL connector only

SCOPE TIPS
1. LC FEMALE & MALE
2. SC FEMALE & MALE
3. MIL FEMALE & MALE

Note: The pen cleaner included in this package set can be used 800 times and it is smaller while  the standard or individual pen cleaner can be used 1000 times.